Hyper-V仮想マシンをInternetにつなげるように

前提条件:

1) OS:Windows 8/8.1 32/64bit
2) Hyper-Vが有効
    Hyper-Vの有効方法:「コントロールパネル」→「プログラム」→「プログラムと機能」→「Windowsの機能の有効かまたは無効化」→「Hyper-V」をチェックオンにする。

設置方法:

1) 仮想スイッチマネジャーで仮想スイッチを作成する
Hyper-V_VirtualSwitch1

2) 新しい仮想ネットワークスイッチをクリックする
Hyper-V_VirtualSwitch2

ここで、外部用の仮想スイッチを選んで、仮想スイッチの作成をクリックする。
3) 仮想スイッチの情報を入力し、Wizardを閉じる
Hyper-V_VirtualSwitch3

4) Internetを使いたい仮想マシンの設定を開く
Hyper-V_VirtualSwitch4

5) ネットワークアダプターで仮想スイッチを設定する
Hyper-V_VirtualSwitch5
ここで、ステップ3で作成した仮想スイッチを選択する。

6) 仮想マシンのDHCPを有効する

ここまでできたら、仮想マシンがインターネットに接続できるだろうと思います。またご不明な点がございましたら、メールしてください。
yanbingms@outlook.jp

Step-By-Step: Enabling Hyper-V for use on Windows 8.1

CANITPRO Camps are always a great way for IT professionals to learn about the new Microsoft ecosystem offerings such as Windows Server 2012 R2, System Center 2012 R2 and others. These camps provide IT professionals both information regarding said ecosystem as well as hands on labs to complete.  These labs enable IT administrators and managers alike to think of ways these labs could better support their needs within their own organization. At the CANITPRO camps which took place in Calgary last week, attendees asked how they could run said labs provided at the camp and via the Step-By-Step posts made available online on the CANITPRO.NET blog. While there are many ways this can be accomplished, the one that resonated loudest was the ability to natively run Hyper-V sessions within Windows 8.1 itself.  
Virtual Machines are great for running different operating systems or software configurations on a single machine and many other additional tasks. The launch of the Windows 8 offering was the first Windows client operating system to include hardware virtualization support without the need for separate installs or downloads. The Hyper-V client found in Windows 8 is the same technology used in Windows Server 2012 Hyper-V allowing IT professionals to move VMs from server to client without the requirement to re-learn the use of Hyper-V features and tools.
In Windows 8.1 further enhancements to the Client Hyper-V were introduced. The most notable update called Enhanced Session Mode enables high fidelity graphics for connections to VM’s using the RDP protocol.  In addition USB redirection is also enabled from the host to VM’s. 
Step 1: Prerequisites

The following prerequisites are required to successfully run Client Hyper-V on Windows 8.1:

Step 2: Setting Up Hyper-V

  1. Ensure that hardware virtualization support is turned on in the BIOS settings.
  2. Save the BIOS settings and boot up the machine normally,
  3. At the Start Screen, swipe the right hand side of the screen and select the Search Charm.
  4. Type turn windows features on or off and select that item
  5. Select and enable Hyper-V

  6. If Hyper-V was not previously enabled, reboot the machine to apply the change. 
    NOTE: As a best practice, it’s a good idea to configure networking for the Hyper-V environment to support external network connections. Ensure that a virtual switch has been created and is functional.
  7. Open the Virtual Switch Manager, found on the Actions panel in the Hyper-V Manager, by typing Hyper-V at the Start Screen.
  8. Select “Virtual Switch Manager” in the Actions pane.
  9. Ensure that “External” is highlighted, and then click on the “Create Virtual Switch” button.
  10. If more than one NIC in is present, ensure that the proper NIC is selected for use on the VM external network connections.

    NOTE: There are a great deal of other options and features that can be configure.  This Step-By-Step provides a good starting point and is all that is needed to start creating and using VMs on Window 8 Pro.

To learn about further functionality around Windows 8.1 for Enterprise, please visit Microsoft Virtual Academy and partake in the free Windows 8 for IT Pros Jump Start.